NPE series devices adapt to all applications which require medium and low rate data communication, such as power distribution network, running water, gas pipe, weather station, traffic control, POS and so on...
Every IT specialist knows what Linux has to offer for servers. More and more often, thanks to the power of energy-saving processors, this system becomes the ideal platform for embedded systems and all kinds of drivers... more »
Due to the enormous amount of tools and applications that are given access to by the Linux environment, NPE series products can serve as an ideal hardware platform for dedicated solutions... more »
Danfoss ECL200/300 controller operation – bi-directional data exchange (write/read) with controller in service protocol. Modbus TCP protocol available from Ethernet side. Energy meters with MBus protocol connected to converter through separate serial port . Modem GSM/GPRS
Danfoss ECL300 controller operation – bi-directional data exchange (write/read) with controller in Modbus RTU1 protocol. Modbus TCP protocol available from Ethernet side. Energy meters with MBus protocol connected to controller through ECA73 card. Modem GSM/GPRS
Danfoss ECL300 controller operation – bi-directional data exchange (write/read) with controller in Modbus RTU1 protocol. Modbus TCP protocol available from Ethernet side. Energy meters with MBus protocol connected to controller through ECA73 card.
Selection Guide
NPE Introduction
