Additional
information
F2103 GPRS DTU MBus is a set of converters that allows a transparent transmission from Mbus to GPRS network. This set of devices provides customers high-speed and "always online" technology, it remembers the settings and has an option of automatic reconnect in case of emergency. You can connect up to 10 slave devices to F2103 GPRS DTU MBus set. Furthermore it provides automatic flow control.
MBus serial converters to GPRS have wide application that include telemetry equipment operating in a vast area, difficult to monitored in other way. | Main features: | - Male connector RS232/485
- Serial ports standard RFC2217 support by EIATIA
- Famale anthena connector
- Built-in Watchdogtimer
- Easy to configure
- Support AT commands
- Remember settings even after power failure
- Include technology "always online"
- Adjust to hard conditions (-25°C to 65°C and humidity 5% to 95%)
- 7 work modes
- 5 ways to remote wake up
| 
Technical parameters
| Product features: | | Wireless specification: | - EGSM900/GSM1800
- GPRS multi-slot class 10
- Compliant to GSM phase 2/2+
- Support SMS and data function
| | Hardware system: | - Indicator lights: "Power", "ACT", "Online", "RX", TX;
- Antenna interface: standard SMA famale interface, 50 ohm
- SIM/UIM interface: standard user card interface
- Wireless modul: High power industrial GPRS module
- Interfaces: Mbus (max baud 300 / 19200 baud/sec)
- Maximum Mbus slave number: 10
- Connector: Srew terminal block (5pin)
- Operation temperature: 0...+40C
- Surge protection: M-Bus Interface 43V 600W/1ms
| | Software Function: | - Design with standard TCP/IP protocol stack
- Adopt smart online keeping technology to make sure that DTU is always online
- Support APN
- Transparent data transfer and protocol conversion. Support multi work modes
- Support dynamic domain name(DDNS) and IP access to data center
- Support double data centers, one main and another backup
- Multi online trigger ways, including SMS, audio and data.
- Hardware and software WDT
- Reporting the status of data transfer
- Standard AT command interface
- Support telnet function
- Remote configure and control
- Support multi OS, such as WINDOWS, LINUX, SCO UNIX etc.
- Automatic MBus DataDirection Control
|
|
