GREENTEL R200 series is Machine-to-machine (M2M) industrial cellular router with Din-rail mounting, which works on 2G/3G cellular networks, provides reliable and robust wireless connections.

GREENTEL R200 series is specified for industrial M2M usage. Designed to endure extreme conditions, such as temperatures ranging from -25°C to +70°C and low power consumption.

GREENTEL R200 series also supports the PPTP, L2TP, GPE, IPSec VPN tunnel providing high-grade network security.

Features:

Highly Reliable Network Performance High performance platform, 200 MIPS ARM9, 8 Mbytes NORFlash, 16 Mbytes SDRAM Software and hardware watchdog Always online: PPP LCP echo and ICMP keep alive for link inspection Dial on demand activated by Call/SMS/Local data flow High sensitivity: low signal strength required (CSQ>12) Remote and local firmware upgrade based on redundant firmware backup Large scale remote management via Greentel Device Manager

Ease to Use

Embedded Linux system, TCP/IP and PPP stack, Plug and Play z Configuration via WEB, TELNET, Hyper Terminal and SSH Backup and restore settings z Reset button, software and hardware reset to factory default settings LED indicators for three level cellular network signal strength LED indicators for Power, Status, Warn, Error, Modem

Security

VPN IPSec: DES, 3DES, AES, MD5 and SHA-1 Authentication: Pre-shared key, digital certificate Support PPTP, L2TP, GRE tunnels Firewall: Stateful Packet Inspection(SPI), filtering multicast, filtering PING packet, preventing DoS attack, different firewall strategies Access control: Access control of TCP, UDP, ICMP packet MAC and IP filter, MAC address bundling DMZ: support virtual servers VRRP: Hot backup, auto switch to slave router when master router failed

Robust design for Industrial Application

Rugged casing with DIN-rail mounting and wall mounting Inside SIM card slot, provides SIM card anti-steal Industrial power terminal block, 9 to 48VDC wide range voltage power supply, anti-RCE(reverse connection error), over-current protection One Ethernet port, one RS232 for debug console, one RS232 or RS485 optional Support DTU mode, data transparent transmission via serial port Support Modbus RTU/TCP via RS485 (Optional) Wide range operation temperature: -25°C to 70°C Operation humidity: 5% to 95%, non-condensing IP30 grade protection Optimized EMC design

Applications:

Machine-to-machine (M2M) Telemetry SCADA Monitoring and Surveillance DSL/Cable Infrastructure Backup AVL Credit card verifications, POS and ATM

Product Kit:

M2M Industrial Cellular Router AC/DC Adapter Rubber antenna and magnetic mount antenna optional DIN-rail optional RS232 to RS485 converter optional Ethernet Cable RJ45 Debug console cable RJ45-RS232 optional CD

Mechanism

Device Manager for large scale remote management:

Remote Configuration: configure your devices remotely; Mass Upgrade: realize auto remote upgrade and auto mass remote upgrade of devices; manage router’s Firmware version; Large Quantity of Access Points: can manage more than 800 access points of routers, and can expand through upgrading or extension; High Practicality: adaptable to network of any structure - Internet, VPDN, wireless DDN, and other private networks; B/S Structure: no need of special software or configurations on client-end and can just monitor routers anywhere anytime; Multi-Level User Authority Management: secure system and devices; GIS-Based Status Monitoring: support GPS, provide vector map location management; Online Status Real-time Monitoring: online, offline, alert; Alert: support local interface alert, SMS and E-mail alert; Historical Data Inquiry: inquire and get on/offline status of designated devices; Connection Statistics Report: provide connection statistics for analyzing connection status; Extended Service Monitoring: By upgrading router, implement monitoring of devices(PLC, controller, intelligent equipment, PC, etc.) that are connected to routers;

Remark: This software is not default kit for R200 series router. For detail information please contact us.