MODBUS Master/Slave/Gateway

Modbus is an open standard of communication, widely used in automation. Because of the uncountable number of devices and software using it, the protocol is used very frequently as a medium integrating various systems. NPE can operate in Master and Slave mode for the Modbus protocol.

Modbus Gateway - because of the large amount of slave type devices, the functionality of a Modbus gateway or Modbus proxy is used, thanks to which it is possible to convert the transmission channel from RS-485 buses to TCP/IP, for example.

NPE as a device operating in Modbus Gateway mode

Modbus Slave - below, NPE is shown during operation in Modbus Slave mode

NPE as operating in slave mode on TCP port, communication with SCADA type software

NPE as a device of the Modbus Slave type on a TCP port, communication with SCADA type software

See more functionalities »

Articles in Categories

	NPE as a serial port converter
	There is often a need for remote access to devices with serial port interface. A typical solution to this situation is communication through ... more »

	NPE as SNMP server
	NPE has an implemented SNMP service thanks to which it can be connected to a uniform system managing devices based on this protocol... more »

	NPE as Network GPRS Router
	GPRS/EDGE Communication has found widespread applications in industry as well as subjects of public utility... more »

	NPE as an internet server
	The NPE computer can operate as a fully functional internet server based on software of international quality... more »

	NPE as a datalogger
	NPE services SD cards up to 2GB of capacity and has a built-in fast flash memory of up to 1GB capacity which makes this device a functional data logger... more »

PRODUCT CATALOGUE

NPE Platform

NPE as MODBUS Master/Slave/Gateway

Functionality

MODBUS Master/Slave/Gateway