MODBUS Master/Slave/Gateway

Modbus is an open standard of communication, widely used in automation. Because of the uncountable number of devices and software using it, the protocol is used very frequently as a medium integrating various systems. NPE can operate in Master and Slave mode for the Modbus protocol.

Modbus Gateway - because of the large amount of slave type devices, the functionality of a Modbus gateway or Modbus proxy is used, thanks to which it is possible to convert the transmission channel from RS-485 buses to TCP/IP, for example.

NPE as a device operating in Modbus Gateway mode

Modbus Slave - below, NPE is shown during operation in Modbus Slave mode

NPE as operating in slave mode on TCP port, communication with SCADA type software

NPE as a device of the Modbus Slave type on a TCP port, communication with SCADA type software

�

See more functionalities »

Articles in Categories: Functionality Collapse

	NPE as a serial port converter
	There is often a need for remote access to devices with serial port interface. A typical solution to this situation is communication through ... Read article »

	NPE as MODBUS Master/Slave/Gateway
	NPE can work both in Master mode and Slave to the Modbus protocol... Read article »

	NPE as SNMP server
	NPE has an implemented SNMP service thanks to which it can be connected to a uniform system managing devices based on this protocol... Read article »

PRODUCT CATALOGUE

NPE as MODBUS Master/Slave/Gateway

NPE Platform

NPE as MODBUS Master/Slave/Gateway

MODBUS Master/Slave/Gateway