NPE M700 is a series of industrial computers which you can easily adapt to your needs by choosing from the available options. Upgraded NPE M700 industrial computer series is powered by Quad-core Cortex-A7 1.2GHz processor, eqiupped with 1GB DDR3 RAM, 8GB eMMC on-board and Gigabit Ethernet for high performance. NPE features industrial protocol support, e.g. Modbus, M-Bus, SNMP, MQTT and more.
Ready-to-use programmable automation controller
The NPE M700platform has a variety of functionalities and is easy to configure at the same time– it combines ease of use, characteristic of simple devices with the possibilities of embedded computers.
State of the art performance reached with Quad-Core Cortex A7 1.2 GHz fanless processor,allows using NPE M700 device for specific application, like smartgrid remote control
Quad-Core Cortex A7 1.2 GHzprocessor
1024MB DDR3 RAM,8GB NAND FLASH and microSD slot
Rich set of I/O interfaces: 4x Digital Input, 4x Digital Output
Economic 1-Wire bus, typically used for reading temperature and humidity sensors
The design of the NPE M700 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability. The Linux system provides stable operation of the device.
NPE M700 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.
NPE M700 can generate alarm signals and provide information on current parameter values. Built-in LTE/3G/GPRS modem enables wireless communication.
With a built-in GSM modem, NPE M700 offers advanced functions and can be configured as an industrial modem and a router operating in GPRS, EDGE network as well as in 3G mobile network. You can easily get a backup connection mode and define routing.
You can build a VPN with NPE M700. You can access other devices with one telemetry module with a defined public IP. The VPN guarantees high security of data transmission.
3G technology provides higher speed and lower latency at packet data transmission.
GPS receiver allows to use the satellite navigation system. The system is widely used in vehicle monitoring (e.g. transport, railway industry or municipal communication). It allows to synchronize time in extensive industrial networks. It is also used to set a route for industrial machines.
iMod Platform Support.NPE M700 can easily work with iMod telemetry modules and in nearest future with iMod M700.
iModCloud Ecosystem. A combination of a cloud service with a web user interface and special industrial devices that are fully manageable remotely. Core iModCloud Ecosystem elements are iMod controllers and iModCloud service. iMod controllers and iModCloud service together stand as a complete solution.
iModCloud - Dedicated Cloud Service
iModCloud - a dedicated cloud service - allows you to visualize and control parameters of any number of devices via a web browser. Now iModCloud expands to support NPE M700 devices.
With iModCloud you can control all your facilities via any mobile device, register data and share selected information with other users.
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/1024 MB Ram, 4096 MB Flash, Linux 4.4+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT