NPE X1

Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
I/O
Device type
Converter type

PRODUCT CATALOGUE

Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, Arduino, ESP32, RTC, WatchDog, 1 x RS-232 / 1 x RS-485, 4 x DIO, 2 x AI, GPRS/LTE-NB modem options, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee

NPE X1

Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, Arduino, ESP32, RTC, WatchDog, 1 x RS-232 / 1 x RS-485, 4 x DIO, 2 x AI, GPRS/LTE-NB modem options, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee
Product configuration Collapse
M-Bus support: none Expand
Wireless communication: Wi-Fi/Bluetooth (only) Expand
Ethernet: none Expand
Battery power supply: Battery 10Ah Expand
OLED Display: none Expand

 

Energy-efficient ESP32-based
Industrial Automation Controller

iModCloud Ecosystem

NPE X1 is a lightweight, but powerful energy-efficient and fully capable automation controller series. X1 is an industrial computer for remote data control and management, equipped with latest ESP32 compute module, wide range of serial, digital and analog inputs/outputs and wireless communication interfaces.

This cost effective solution is perfect for end-point devices. NPE X1 is powered by ultra-low power Dual-Core Tensilica LX6 240 MHz processor with 4MB pSRAM* and 4MB SPI flash memory on-board. Integrated Wi-Fi/BLE modem and extra wireline/wireless interfaces make the NPE X1 micro-computer a versatile addition to Industrial IoT solutions offered by TECHBASE company.

NPE X1 protocols

NPE X1 devices can easily work remotely with existing NPE X500 gateway for data accumulation and monitoring, to perform specific actions before sending the data to cloud services. The X1 - X500 installation can work as standalone Ecosystem (for example via MQTT), providing fog-computing to any installation.

SOFTWARE & OS

Use of ESP32-WROVER compute module adds the support for real-time operating systems (compared to most Raspberry Pi based Linux and Windows OS versions), and openness of the Espressif’s platform to NPE X1 industrial automation controller. Thanks to enormous community of ESP32 and Arduino users and developers, the NPE X1 can now adapt existing software solutions, tools and programming environments, for example:

  • ESP-IDF (Espressif IoT Development Framework)
  • Zephyr Project (scalable RTOS)
  • Arduino (C++)
  • MicroPython
  • Mongoose OS
  • etc.

END-POINT SENSORS

The NPE X1 device is a comprehensive end-point controller for variety of sensors located throughout any installation. It fully supports temperature and humidity sensors and new ones are currently developed, e.g. accelerometer, gyroscope, magnetometer, etc.

iModCloud Ecosystem

 

Base version

  • Dual-Core Tensilica LX6 240 MHz processor, RTC
  • 512KB/4 MB pSRAM, 4 MB SPI Flash
  • Set of I/O interfaces: 1x RS-232/485, 4x Digital Input/Output, 2x Analog Input
  • Wi-Fi, Bluetooth v4.2 modem with U.FL (IPEX) antenna connector
  • ABS casing, DIN horizonal rail mounting

Internal Hardware Add-on Options

  • 1x Ethernet 10/100 Mbps
  • OLED 0.96" 128x64
  • LoRa modem
  • NarrobBand-IoT modem
  • Sigfox modem

 

NPE X1 can perform the following functions:

Data logger

NPE X1 computer offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:

  • Serial port

  • Digital and analog I/Os
  • Wi-Fi / Bluetooth
  • Wireless LoRa, NarrowBand-IoT, Sigfox transmission
  • etc.

Protocol and Interface Converter

Due to flexible configuration, the device can operate as a protocol and interface converter:

  • Modbus
  • M-Bus
  • MQTT

Embedded Computer

The design of the NPE X1 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability.

Telemetry module

NPE X1 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.

NPE X1 can generate alarm signals and provide information on current parameter values. Built-in Wi-Fi / Bluetooth modem and optional LoRa / NarrowBand-IoT (LTE-NB1) / Sigfox modems enable wireless communication.

PLC

NPE X1 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation. NPE X1 is a stable central unit of an automation system.

Industrial modem and LoRa/NarrowBand-IoT/Sigfox router

With a built-in Wi-Fi/Bluetooth modem, NPE X1 offers advanced functions and can be configured as an industrial modem and a router operating in LoRa / NarrowBand-IoT (LTE-NB1) / Sigfox network. You can easily get a backup connection mode and define routing. NarrowBand-IoT (LTE-NB1) technology provides higher speed and lower latency at packet data transmission.

NarrowBand-IoT (LTE-NB1) Notify module

With a built-in NarrowBand-IoT (LTE-NB1) modem, the NPE X1 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, pressure, humidity, etc.).

You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.

System supervisor will immediately receive SMS or e-mail notification

Related products Collapse
Negotiate
Product card
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM11 700MHz, 512/1024 MB Ram, 4 GB Flash, Linux 4.4+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
ZigBee Relay I/O Module: 2 relay outputs, 1 digital input, 1 digital output, 3 analog inputs, 2 digital inputs, 1 meter input, built-in temperature sensor, DC power supply
Negotiate
Product card
Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, microSD, Arduino, ESP32, RTC, WatchDog, 2 x RS-232 / 2 x RS-485, 8 x DIO, 4 x AI, 2 x AO, 1 x Ethernet, UPS power supply, GPRS/LTE-NB modem, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee, ExCard modules
Negotiate
Product card
Multi-channel ZigBee Sensor with Battery Power Supply: built-in temperature sensor, 1 analog input, 2 digital inputs, 1 meter input, battery power supply
Negotiate
Product card
iModCloud Software on Mini-PC BOX with quad coreIntel Celeron N2930 1.83GHz (boost do 2.16GHz), 8GB DDR3, 250GB SSD, mSATA/Mini PCI-e, 3xRS-232, 1xRS-232/422/485, 2x Gigabit LAN, 1x USB 3.0, 5x USB 2.0, HD Audio, DVI-D, VGA, Wi-Fi ready, SIM holder, 12V AC-DC
Negotiate
Product card
NPE M1000 - Industrial computer, IoT Gateway, Quad-core Intel Atom x5 Z8350 1.44GHz (up to 1.92GHz), 1/2/4 GB RAM, 16/32/64 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 3.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/1024 MB Ram, 4096 MB Flash, Linux 4.4+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT
Negotiate
Product card
RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), 8GB DDR3, 250GB SSD, 2x 2,5" SATA2, 1x mSATA, 1x Mini PCI-e, 1xRS-232/422/485, 4x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, SIM holder, VGA (option), GPIO (option), dodatkowy COM (option)
Negotiate
Product card
iModCloud Software on VPS (H100) or dedicated server (H500)
Negotiate
Product card
NPE M700 - Industrial computer, IoT Gateway, Quad-core Cortex A7 1.2 GHz, 1024 MB RAM, 8 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 2.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Similar products
Industrial computer NPE 9500 with iMod Software, Cortex-A53 4x1.2GHz, 1024 MB Ram, 4096 MB Flash, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, Telemetry Module, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, embedded box, serial server, IoT, iMod, GPIO, Modbus, MQTT, SNMP
Industrial computer NPE 9500 with iMod Software, Cortex-A53 4x1.2GHz, 1024 MB Ra...
Product features
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM11 700MHz, 512/1024 MB Ram, 4 GB Flash, Linux 4.4+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM1...
Product features

NPE X500

Compatible OS
Interfaces
Graphics interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Switch features
I/O
Device type
Converter type
Processor type
GPS
Industrial computer NPE X500 Plus, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 3 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 2 x AI, 1 x 1-Wire, 1 x USB 2.0, 1 x SIM CARD slot, LTE, M-Bus, Wi-Fi, Bluetooth, GPS, Zigbee, IoT
Industrial computer NPE X500 Plus, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Lin...
Product features

NPE X500 Plus

Compatible OS
Interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Switch features
I/O
Device type
Converter type
GPS
Processor type
NPE M1000 - Industrial computer, IoT Gateway, Quad-core Intel Atom x5 Z8350 1.44GHz (up to 1.92GHz), 1/2/4 GB RAM, 16/32/64 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 3.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
NPE M1000 - Industrial computer, IoT Gateway, Quad-core Intel Atom x5 Z8350 1.44...
Product features

NPE M1000

Compatible OS
Processor type
Interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Network interfaces
Switch features
I/O
Device type
Converter type
GPS
Industrial computer NPE X500 Plus with iMod software, Telemetry Module, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 3 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 2 x AI, 1 x 1-Wire, 1 x USB 2.0, 1 x SIM CARD slot, LTE, M-Bus, Wi-Fi, Bluetooth, GPS, Zigbee, embedded computer, serial server, IoT, iMod, GPIO, Modbus, MQTT, SNMP
Industrial computer NPE X500 Plus with iMod software, Telemetry Module, ARM11, 7...
Product features
Industrial computer NPE X500 with iMod Software, Telemetry Module, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x CAN, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, embedded computer, serial server, IoT, iMod, GPIO, Modbus, MQTT, SNMP
Industrial computer NPE X500 with iMod Software, Telemetry Module, ARM11, 700MHz...
Product features
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/1024 MB Ram, 4096 MB Flash, Linux 4.4+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/...
Product features

NPE 9500

Compatible OS
Interfaces
Graphics interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Switch features
I/O
Device type
Converter type
Processor type
GPS
Industrial Computer NPE X1000 with iMod software, Telemetry Module, Cortex A8 800MHz, 32 I/O, 6xRS-232, 2xRS-485, CAN, 2xEthernet, 1-Wire, USB 2.0, 3 expansion cards, LTE, embedded computer, zigbee, IoT, iMod, Wi-Fi, Bluetooth, GPIO, GPS, Modbus, MQTT, SNMP
Industrial Computer NPE X1000 with iMod software, Telemetry Module, Cortex A8 80...
Product features
Industrial computer NPE X1000, Cortex A53 1.2GHz, Linux, 4x DI, 4x DO, up to 24x Relay, up to 48x AI/AO, up to 76x DIO, up to 10xRS-232/485, CAN, up to 3x Ethernet, 1-Wire, 2x USB, HDMI, 3G/LTE, GPRS, Wi-Fi, GPS, Bluetooth, ZigBee, LoRa, NB-IoT, HDMI, 6x expansion slots, WT, industrial controller, device server, programmable device, fanless, router, LTE, IoT
Industrial computer NPE X1000, Cortex A53 1.2GHz, Linux, 4x DI, 4x DO, up to 24x...
Product features
Industrial computer NPE M500 with iMod software, Telemetry Module, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, embedded box, Winows 10 IoT, CODESYS
Industrial computer NPE M500 with iMod software, Telemetry Module, ARM Cortex-A5...
Product features
Industrial computer NPE 9400 with iMod Software, ModBus telemetry module. Datalogger, modbus gateway, alarm channels, converter, 1-wire, ethernet, Linux, ARM9, SD, MMC, Flash, fanless, SNMP, WWW panel, BOX, router, 180MHz, CPU ARM9 180MHz, 2x RS-232, 1x RS-485, do, usb, zigbee, relay, di, 10/100 TX, 180 MHz, analog in, i/o module, IoT, 1000base-tx, i/0 module, 3G, serial server, IoT, wi-fi, bluetooth, GPIO, GPRS, GPS, Modbus, MQTT, SNMP
Industrial computer NPE 9400 with iMod Software, ModBus telemetry module. Datalo...
Product features
Industrial computer NPE M500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, Windows 10 IoT, CODESYS
Industrial computer NPE M500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram,...
Product features

NPE M500

Compatible OS
Processor type
Interfaces
Graphics interfaces
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Switch features
I/O
Device type
Converter type
GPS
Industrial computer NPE M9500 with iMod software, Telemetry Module, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, embedded box, Windows 10 IoT, CODESYS
Industrial computer NPE M9500 with iMod software, Telemetry Module, ARM Cortex-A...
Product features
Industrial computer NPE M9500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, Windows 10 IoT, CODESYS
Industrial computer NPE M9500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram...
Product features

NPE M9500

Compatible OS
Processor type
Interfaces
Graphics interfaces
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Switch features
I/O
Device type
Converter type
GPS
NPE X400 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHzz, 1024 MB RAM, 4 GB Flash, Linux 4.4+, RTC, WatchDog, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
NPE X400 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHzz, 1024 ...
Product features

NPE X400

Compatible OS
Interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
I/O
Device type
Converter type
Processor type
GPS
NPE M700 - Industrial computer, IoT Gateway, Quad-core Cortex A7 1.2 GHz, 1024 MB RAM, 8 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 2.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
NPE M700 - Industrial computer, IoT Gateway, Quad-core Cortex A7 1.2 GHz, 1024 M...
Product features

NPE M700

Compatible OS
Interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Network interfaces
Switch features
I/O
Device type
Converter type
Processor type
GPS