NPE X2

Storage
GSM Modem
Wireless communication
Interfaces
Module type
Serial ports
Converter type
Device features
Switch features
I/O
Device type

PRODUCT CATALOGUE

Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, microSD, Arduino, ESP32, RTC, WatchDog, 2 x RS-232 / 2 x RS-485, 8 x DIO, 4 x AI, 2 x AO, 1 x Ethernet, UPS power supply,  GPRS/LTE-NB modem, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee, ExCard modules

NPE X2

Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, microSD, Arduino, ESP32, RTC, WatchDog, 2 x RS-232 / 2 x RS-485, 8 x DIO, 4 x AI, 2 x AO, 1 x Ethernet, UPS power supply, GPRS/LTE-NB modem, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee, ExCard modules
Product configuration Collapse
Wireless communication: Wi-Fi/Bluetooth (only) Expand
M-Bus support: none Expand
Ethernet: none Expand
OLED Display: none Expand
UPS for power supply: none Expand
1st Expansion Card: none Expand

 

Energy-efficient ESP32-based
Industrial Automation Controller

Moduino X Series

NPE X2 is a lightweight, but powerful energy-efficient and fully capable automation controller series. X2 is an industrial computer for remote data control and management, equipped with latest ESP32 compute module, wide range of serial, digital and analog inputs/outputs and wireless communication interfaces.

This cost effective solution is perfect for end-point devices. NPE X2 is powered by ultra-low power Dual-Core Tensilica LX6 240 MHz processor with 4MB pSRAM* and 4MB SPI flash memory on-board. Integrated Wi-Fi/BLE modem and extra wireline/wireless interfaces make the NPE X2 micro-computer a versatile addition to Industrial IoT solutions offered by TECHBASE company.

NPE X1 protocols

NPE X2 devices can easily work remotely with existing NPE X500 gateway for data accumulation and monitoring, to perform specific actions before sending the data to cloud services. The X2 - X500 installation can work as standalone Ecosystem (for example via MQTT), providing fog-computing to any installation.

SOFTWARE & OS

Use of ESP32-WROVER compute module adds the support for real-time operating systems (compared to most Raspberry Pi based Linux and Windows OS versions), and openness of the Espressif’s platform to NPE X2 industrial automation controller. Thanks to enormous community of ESP32 and Arduino users and developers, the NPE X2 can now adapt existing software solutions, tools and programming environments, for example:

  • ESP-IDF (Espressif IoT Development Framework)
  • Zephyr Project (scalable RTOS)
  • Arduino (C++)
  • MicroPython
  • Mongoose OS
  • etc.

END-POINT SENSORS

The NPE X2 device is a comprehensive end-point controller for variety of sensors located throughout any installation. It fully supports temperature and humidity sensors and new ones are currently developed, e.g. accelerometer, gyroscope, magnetometer, etc.

iModCloud Ecosystem

 

Base version

  • Dual-Core Tensilica LX6 240 MHz processor, RTC
  • 512KB/4 MB pSRAM, 4 MB SPI Flash
  • Set of I/O interfaces: 2x RS-232/485, 8x Digital Input/Output, 4x Analog Input
  • Wi-Fi, Bluetooth v4.2 modem with U.FL (IPEX) antenna connector
  • ABS casing, DIN horizonal rail mounting

Internal Hardware Add-on Options

  • 2x Analog Input
  • 1x Ethernet 10/100 Mbps
  • microSD slot
  • OLED 0.96" 128x64
  • LoRa modem
  • NarrobBand-IoT modem
  • Sigfox modem
  • ExCard extension modules

 

NPE X2 can perform the following functions:

Data logger

NPE X2 computer offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:

  • Serial port

  • Digital and analog I/Os
  • Ethernet
  • Wi-Fi / Bluetooth
  • Wireless LoRa, NarrowBand-IoT, Sigfox transmission
  • etc.

Protocol and Interface Converter

Due to flexible configuration, the device can operate as a protocol and interface converter:

  • Modbus
  • M-Bus
  • MQTT
  • SNMP

Embedded Computer

The design of the NPE X2 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability.

Telemetry module

NPE X2 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.

NPE X2 can generate alarm signals and provide information on current parameter values. Built-in Wi-Fi / Bluetooth modem and optional LoRa / NarrowBand-IoT (LTE-NB1) / Sigfox modems enable wireless communication.

PLC

NPE X2 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation. NPE X2 is a stable central or end-point unit of an automation system.

Industrial modem and LoRa/NarrowBand-IoT/Sigfox router

With a built-in Wi-Fi/Bluetooth modem, NPE X2 offers advanced functions and can be configured as an industrial modem and a router operating in LoRa / NarrowBand-IoT (LTE-NB1) / Sigfox network. You can easily get a backup connection mode and define routing. NarrowBand-IoT (LTE-NB1) technology provides higher speed and lower latency at packet data transmission.

NarrowBand-IoT (LTE-NB1) Notify module

With a built-in NarrowBand-IoT (LTE-NB1) modem, the NPE X2 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, pressure, humidity, etc.).

You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.

System supervisor will immediately receive SMS or e-mail notification

Related products Collapse
Negotiate
Product card
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM11 700MHz, 512/1024 MB Ram, 4 GB Flash, Linux 4.4+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
ZigBee Relay I/O Module: 2 relay outputs, 1 digital input, 1 digital output, 3 analog inputs, 2 digital inputs, 1 meter input, built-in temperature sensor, DC power supply
Negotiate
Product card
Multi-channel ZigBee Sensor with Battery Power Supply: built-in temperature sensor, 1 analog input, 2 digital inputs, 1 meter input, battery power supply
Negotiate
Product card
iModCloud Software on Mini-PC BOX with quad coreIntel Celeron N2930 1.83GHz (boost do 2.16GHz), 8GB DDR3, 250GB SSD, mSATA/Mini PCI-e, 3xRS-232, 1xRS-232/422/485, 2x Gigabit LAN, 1x USB 3.0, 5x USB 2.0, HD Audio, DVI-D, VGA, Wi-Fi ready, SIM holder, 12V AC-DC
Negotiate
Product card
NPE M1000 - Industrial computer, IoT Gateway, Quad-core Intel Atom x5 Z8350 1.44GHz (up to 1.92GHz), 1/2/4 GB RAM, 16/32/64 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 3.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, Arduino, ESP32, RTC, WatchDog, 1 x RS-232 / 1 x RS-485, 4 x DIO, 2 x AI, GPRS/LTE-NB modem options, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee
Negotiate
Product card
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/1024 MB Ram, 4096 MB Flash, Linux 4.4+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT
Negotiate
Product card
RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), 8GB DDR3, 250GB SSD, 2x 2,5" SATA2, 1x mSATA, 1x Mini PCI-e, 1xRS-232/422/485, 4x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, SIM holder, VGA (option), GPIO (option), dodatkowy COM (option)
Negotiate
Product card
iModCloud Software on VPS (H100) or dedicated server (H500)
Similar products
1- Serial Port RS232/422/485 to Ethernet Networking converter, Power supply 9-24 Vdc. Virtual Com, device server, 100Base-TX, wt, CPU 100MHz
1- Serial Port RS232/422/485 to Ethernet Networking converter, Power supply 9-24...
Product features

ATC-2000

Interfaces
Serial ports
Processor speed
Ethernet device type
Network interfaces
Converter type
Other
Device features
Output voltage
RS232/422/485 to Ethernet converter, device server, 1x 100Base-TX RJ-45, wt, CPU 25MHz, TCP, SNMP, RS232/422/485 to Ethernet converter, device server, 1x 10Base-T or 1x100Base-TX RJ-45, wt, CPU 25MHz, 64KB OTP ROM
RS232/422/485 to Ethernet converter, device server, 1x 100Base-TX RJ-45, wt, CPU...
Product features

ATC-1000

Interfaces
Serial ports
Device features
Processor speed
Ethernet device type
Network interfaces
Converter type
Other
Low cost TTL/RS-232/422/485 to TCP/IP, embedded serial-to-erthernet module, converter module
Low cost TTL/RS-232/422/485 to TCP/IP, embedded serial-to-erthernet module, conv...
Product features

ATC-1000M

Interfaces
Device type
Serial ports
Converter type
Device features
4x RS232/422/485 to Ethernet Networking converter, Power supply 9-24Vdc, Virtual Com, device server, power supply
4x RS232/422/485 to Ethernet Networking converter, Power supply 9-24Vdc, Virtual...
Product features
Single-port Serial-to-Ethernet Gateway with 64KB user web space, RS232/422/485
Single-port Serial-to-Ethernet Gateway with 64KB user web space, RS232/422/485...
Product features

Aport-211W

Interfaces
Serial ports
Converter type
Device features
Switch features
1- Serial Port RS232/422/485 to Ethernet Networking converter. Power supply 9-60Vdc. Virtual Com., device server, 10Base-T, wt, CPU 100Mhz
1- Serial Port RS232/422/485 to Ethernet Networking converter. Power supply 9-60...
Product features

ATC-2000H

Interfaces
Serial ports
Processor speed
Ethernet device type
Network interfaces
Converter type
Other
Device features
Single-mode optical fiber MODEM, converter, Ethernet, device server, 100fx, RS-232, RS-485, RS-422, ethernet converter, single mode
Single-mode optical fiber MODEM, converter, Ethernet, device server, 100fx, RS-2...
Product features

ATC-277SM

Interfaces
Serial ports
Ethernet device type
Network interfaces
Converter type
Device features
Module type
Switch features
Two-port Serial-to-Ethernet Gateway with virtual COM support, rs422, rs485
Two-port Serial-to-Ethernet Gateway with virtual COM support, rs422, rs485...
Product features

Aport-312

Interfaces
Serial ports
Converter type
Device features
Switch features
Single-port Serial-to-Ethernet Gateway with virtual COM support, RS-422, RS-485
Single-port Serial-to-Ethernet Gateway with virtual COM support, RS-422, RS-485...
Product features

Aport-311

Interfaces
Serial ports
Converter type
Device features
Switch features
TCP/IP to RS-232 embedded converter module, CPU 100MHz, 100base-TX, windows, linux, TCP, IP, UDP, TELNET, ARP, SMTP
TCP/IP to RS-232 embedded converter module, CPU 100MHz, 100base-TX, windows, lin...
Product features

ATC-2000M

Compatible OS
Interfaces
Device features
Device type
Serial ports
Processor speed
Network interfaces
Converter type
Switch features
Single-port Serial-to-Ethernet Gateway, RS-422, RS-485
Single-port Serial-to-Ethernet Gateway, RS-422, RS-485...
Product features

Aport-211S

Interfaces
Serial ports
Converter type
Device features
Switch features
Multi-mode optical fiber MODEM, converter, Ethernet, device server, 100fx, RS-232, RS-422, RS-485
Multi-mode optical fiber MODEM, converter, Ethernet, device server, 100fx, RS-23...
Product features

ATC-277MM

Interfaces
Serial ports
Ethernet device type
Network interfaces
Converter type
Device features
Module type
Switch features
Serial-to-Ethernet Device Servers, device server
Serial-to-Ethernet Device Servers, device server...
Product features

DS-715

Interfaces
Serial ports
Ethernet device type
Converter type
Device features
TCP/IP to Single Port Converter,  32-bit RISC (NP7/9 series), 32MB RAM, DB9-DTE (Male), 1 x RJ-45, 10Base-T or 100Base-TX, 1xRS-232/422/485, 9-24 VDC@500mA——100mA
TCP/IP to Single Port Converter, 32-bit RISC (NP7/9 series), 32MB RAM, DB9-DTE ...
Product features

ATC-3000

Interfaces
Serial ports
Network interfaces
Converter type
Device features
Output voltage
Switch features
Number of network ports
Serial-to-Ethernet Device Servers, device server
Serial-to-Ethernet Device Servers, device server...
Product features

DS-712

Interfaces
Serial ports
Ethernet device type
Converter type
Device features
Industrial media converter, 1000Base-TX to 1000Base-FX, 1000BaseT(X) to 1000BaseSX/LX/LHX/ZX, DIN rail, single mode, multi mode, SFP Slot
Industrial media converter, 1000Base-TX to 1000Base-FX, 1000BaseT(X) to 1000Base...
Product features

EF23G

Interfaces
Network interfaces
Converter type
Device features
Network connector
Switch features
Mount type