NPE X500 Plus

Compatible OS
Interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Switch features
I/O
Device type
Converter type
GPS
Processor type

PRODUCT CATALOGUE

Industrial computer NPE X500 Plus, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 3 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 2 x AI, 1 x 1-Wire, 1 x USB 2.0, 1 x SIM CARD slot, LTE, M-Bus, Wi-Fi, Bluetooth, GPS, Zigbee, IoT

NPE X500 Plus

Industrial computer NPE X500 Plus, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 3 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 2 x AI, 1 x 1-Wire, 1 x USB 2.0, 1 x SIM CARD slot, LTE, M-Bus, Wi-Fi, Bluetooth, GPS, Zigbee, IoT
Product configuration Collapse
Procesor Module : Not selected Expand
PCI-e Expansion: none Expand
Untitled 1

NPE X500 - Programmable automation controller

 

NPE X500 is a series of industrial computers which you can easily adapt to your needs by choosing from the available options. 

 

NPE X500 advantages

 

 

ico-sup

 

 

 

 

Ready-to-use programmable automation controller

 

 

 

ico-rasp

 

The NPE X500 platform has a variety of functionalities and is easy to configure at the same time – it combines ease of use, characteristic of simple devices with the possibilities of embedded computers.

 

 

ico-perf

 

 

High performance reached with ARM11 700 MHz processor, allows using NPE X500 device for specific application, like smartgrid remote control

 

 

 

Hardware resources

Base version

  • Processor ARM11 700 MHz
  • 512MB RAM and 4GB NAND FLASH
  • Rich set of I/O interfaces: 4x Digital Input, 4x Digital Output
  • Ethernet communication
  • Economic 1-Wire bus, typically used for reading temperature and humidity sensors

Hardware Add-on Options

  • 2x RS-232/485
  • 2x Analog Inputs
  • PCI-Express
  • Aluminum casing
  • 1x M-bus Master / RS-232

Internal expansion cards

  • LTE/3G
  • GPS
  • WiFi
  • Bluetooth

  

NPE X500 can perform the following functions:

NPE X500 telemetry module offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:

  • Serial ports

  • Wireless LTE/3G/GPRS/EDGE transmission

  • Ethernet

  • USB

Due to flexible configuration, the device can operate as a protocol and interface converter:

  • Modbus TCP

  • Modbus RTU

  • M-Bus

  • SNMP

  • 1-Wire

In addition, due to the possibilities of the Linux operating system, each user can create their own protocols with the use of the available SDK.

The design of the NPE X500 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability. The  Linux system provides stable operation of the device.

NPE X500 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.

NPE X500 can generate alarm signals and provide information on current parameter values. Built-in LTE/3G/GPRS modem enables wireless communication.

NPE X500 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation.

Due to the Linux operating system - NPE X500 is a stable central unit of an automation system.

With a built-in GSM modem, NPE X500 offers advanced functions and can be configured as an industrial modem and a router operating in GPRS, EDGE network as well as in 3G mobile network. You can easily get a backup connection mode and define routing.

You can build a VPN with NPE X500. You can access other devices with one telemetry module with a defined public IP. The VPN guarantees high security of data transmission.

3G technology provides higher speed and lower latency at packet data transmission.

Due to digital I/O and analog inputs, NPE X500 can successfully replace expansion modules.

The NPE X500 device allows:

visualisation at the monitoring point
remote control via a Web browser
transfer values via any user protocol (e.g. Modbus, SNMP).

With a built-in GSM modem, the NPE X500 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, humidity).

You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.

System supervisor will immediately receive SMS or e-mail notification.

GPS receiver allows to use the satellite navigation system. The system is widely used in vehicle monitoring (e.g. transport, railway industry or municipal communication). It allows to synchronize time in extensive industrial networks. It is also used to set a route for industrial machines.

 

Additional features

    • iMod Platform Support. NPE X500 can easily work with iMod telemetry modules and in nearest future with iMod 500.
    • iModCloud EcosystemA combination of a cloud service with a web user interface and special industrial devices that are fully manageable remotely. Core iModCloud Ecosystem elements are iMod controllers and iModCloud service. iMod controllers and iModCloud service together stand as a complete solution.

 

iModCloud - Dedicated Cloud Service

iModCloud - a dedicated cloud service - allows you to visualize and control parameters of any number of devices via a web browser. Now iModCloud expands to support NPE X500 devices.

With iModCloud you can control all your facilities via any mobile device, register data and share selected information with other users.

iModCloud - dedykowany system internetowy

 

Related products Collapse
Negotiate
Product card
Negotiate
Product card
ZigBee Relay I/O Module: 2 relay outputs, 1 digital input, 1 digital output, 3 analog inputs, 2 digital inputs, 1 meter input, built-in temperature sensor, DC power supply
Negotiate
Product card
Negotiate
Product card
Negotiate
Product card
Multi-channel ZigBee Sensor with Battery Power Supply: built-in temperature sensor, 1 analog input, 2 digital inputs, 1 meter input, battery power supply
Negotiate
Product card
Negotiate
Product card
Negotiate
Product card
Negotiate
Product card
iModCloud Software on Mini-PC BOX with quad coreIntel Celeron N2930 1.83GHz (boost do 2.16GHz), 8GB DDR3, 250GB SSD, mSATA/Mini PCI-e, 3xRS-232, 1xRS-232/422/485, 2x Gigabit LAN, 1x USB 3.0, 5x USB 2.0, HD Audio, DVI-D, VGA, Wi-Fi ready, SIM holder, 12V AC-DC
Negotiate
Product card
iModCloud Software on VPS (H100) or dedicated server (H500)
Negotiate
Product card
iMod Software on Mini-PC BOX with quad coreIntel Celeron N2930 1.83GHz (boost do 2.16GHz), up to 8GB DDR3, SSD, mSATA/Mini PCI-e, 3xRS-232, 1xRS-232/422/485, 2x Gigabit LAN, 1x USB 3.0, 5x USB 2.0, HD Audio, DVI-D, VGA, Wi-Fi ready, SIM holder, 12V AC-DC, IoT, iMod, Wi-Fi, Bluetooth, 2xEthernet, modem, GPS, Modbus, MQTT, SNMP
Negotiate
Product card
iMod Software on RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), up to 8GB DDR3, 2x 2,5" SATA2, 1x mSATA, 1x Mini PCI-e, 1xRS-232/422/485, 4x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, SIM holder, VGA (option), GPIO (option), dodatkowy COM (option), box, IoT, iMod, Wi-Fi, Bluetooth, modem, GPS, Modbus, MQTT, SNMP
Negotiate
Product card
iMod Software on VPS (H100) or dedicated server (H500), IoT, iMod, Modbus, MQTT, SNMP
Negotiate
Product card
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM11 700MHz, 512/1024 MB Ram, 4 GB Flash, Linux 4.4+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
Industrial Computer NPE X1000 with iMod software, Telemetry Module, Cortex A8 800MHz, 32 I/O, 6xRS-232, 2xRS-485, CAN, 2xEthernet, 1-Wire, USB 2.0, 3 expansion cards, LTE, embedded computer, zigbee, IoT, iMod, Wi-Fi, Bluetooth, GPIO, GPS, Modbus, MQTT, SNMP
Negotiate
Product card
Digital Temperature Sensor, stainless case, NPE, iMod, 1-Wire (MicroLAN net) bus, IP65
Negotiate
Product card
Digital Temperature Sensor, ABS case, NPE, iMod, 1-Wire (MicroLAN net) bus, IP65
Negotiate
Product card
A set of Internet services - control, configuration, data sharing, security, NPE, iMod, VPN, cloud, cloud computing, cloud services, remote control, groups of devices, network, imod cloud
Negotiate
Product card
Digital Temperature Sensor, copper case, NPE, iMod, 1-Wire (MicroLAN net) bus, IP65
Negotiate
Product card
RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), 8GB DDR3, 250GB SSD, 2x 2,5" SATA2, 1x mSATA, 1x Mini PCI-e, 1xRS-232/422/485, 4x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, SIM holder, VGA (option), GPIO (option), dodatkowy COM (option)
Categories related
 
Similar products
Industrial computer NPE X500 Plus with iMod software, Telemetry Module, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 3 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 2 x AI, 1 x 1-Wire, 1 x USB 2.0, 1 x SIM CARD slot, LTE, M-Bus, Wi-Fi, Bluetooth, GPS, Zigbee, embedded computer, serial server, IoT, iMod, GPIO, Modbus, MQTT, SNMP
Industrial computer NPE X500 Plus with iMod software, Telemetry Module, ARM11, 7...
Product features
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x USB, SD slot, 1x PS/2, 1x D-Sub, fanless, 3x RS-232, windows, linux, vga
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x ...
Product features

eBox-3300MX-C

Compatible OS
Interfaces
Graphics interfaces
Storage
Device features
Device type
Serial ports
Processor speed
Other
Converter type
USB ports
Linux Embedded computer with CPU Intel Atom Z510 / Z530 1.6GHz, DVI, 1x CF, 1x SD, 1x 1.8" HDD UltraDMA / SATA2, 4x COM, 2x USB, audio, Wi-Fi, Gigabit Ethernet, fanless, WT-10+50, size 120x120x40mm, Windows
Linux Embedded computer with CPU Intel Atom Z510 / Z530 1.6GHz, DVI, 1x CF, 1x S...
Product features

BIS-6620II

Compatible OS
Processor type
Interfaces
Graphics interfaces
Storage
Other
Wireless communication
Device features
Device type
Processor speed
Network interfaces
Screen size
Serial ports
Switch features
Converter type
USB ports
Embedded mini PC with CPU Intel Atom Z5 1.6 GHz, RAM 1 GB, VGA, SSD, 1.8" HDD, 4x COM, 4x USB, Audio, Ethernet, WT-10+50, fanless, BOX
Embedded mini PC with CPU Intel Atom Z5 1.6 GHz, RAM 1 GB, VGA, SSD, 1.8" HDD, 4...
Product features

BIS-6620

Screen size
Compatible OS
Processor type
Interfaces
Graphics interfaces
Other
Storage
Device features
Device type
Processor speed
Serial ports
Switch features
Converter type
USB ports
Embedded computer with CPU Intel Atom  N270 1.6GHz-2.93Ghz, 2GB RAM, VGA, DVI, 1x CF, 1x 2.5" SATA HDD, 6x COM, 6x USB, audio, GPIO, Gigabit Ethernet, 1x Mini-PCIe, fanless, size 260x225x199mm, Windows
Embedded computer with CPU Intel Atom N270 1.6GHz-2.93Ghz, 2GB RAM, VGA, DVI, 1...
Product features
Embedded computer, barebone computer with CPU Intel Atom E6XX, RAM 1 GB DDR2, 1x VGA, 1x HDMI, SSD, 1x 1,8" HDD SATA2,  4x COM, 4x USB, audio, Gigabit Ethernet, 2x RJ45, 1x MiniPCIE, Wi-fi
Embedded computer, barebone computer with CPU Intel Atom E6XX, RAM 1 GB DDR2, 1x...
Product features

BIS-6622I

Compatible OS
Processor type
Interfaces
Graphics interfaces
Storage
Other
Wireless communication
Device features
Device type
Network interfaces
Network connector
Screen size
Serial ports
Switch features
Converter type
USB ports
Embedded computer with CPU Intel Atom  N270 1.6GHz, 2 GB RAM, VGA, DVI, 1x CF, 1x 2.5" SATA HDD, 6x COM, 6x USB, audio, GPIO, Gigabit Ethernet, 1x Mini-PCIe, fanless, size 210x205x96.5mm, Windows
Embedded computer with CPU Intel Atom N270 1.6GHz, 2 GB RAM, VGA, DVI, 1x CF, 1...
Product features
Embedded computer with CPU Intel Atom N270 1.6GHz, 2GB RAM, 3x VGA, CF, 2.5" SATA HDD, 6x COM, 6x USB, audio, GPIO, Gigabit Ethernet, Mini-PCIe, fanless, size 260x225x199mm, Windows
Embedded computer with CPU Intel Atom N270 1.6GHz, 2GB RAM, 3x VGA, CF, 2.5" SAT...
Product features
Embedded computer with CPU Intel Atom N270 1.6GHz, 2GB RAM, 1x IDE, 2x SATA, CF, 6x COM, 4x USB 2.0,  1x DB25, fanless, 10/100/1000base-tx, VGA, DVI
Embedded computer with CPU Intel Atom N270 1.6GHz, 2GB RAM, 1x IDE, 2x SATA, CF,...
Product features

AFC-6570

Compatible OS
Processor type
Interfaces
Graphics interfaces
Storage
Device features
Device type
Processor speed
Network interfaces
Other
Serial ports
Switch features
Converter type
USB ports
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x USB, SD slot, 1x PS/2, 1x D-Sub, fanless, 3x RS-232, 1x SATA, windows, linux, vga, 2.5" HDD
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x ...
Product features

eBox-3300MX

Compatible OS
Interfaces
Graphics interfaces
Storage
Device features
Device type
Serial ports
Processor speed
Other
Converter type
USB ports
Compact Embedded System, MSTI PMX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x USB, SD slot, 1x PS/2, 1x D-Sub, fanless, 3x RS-232, windows, linux, vga, ap
Compact Embedded System, MSTI PMX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x ...
Product features

eBox-3300MX-CAP

Compatible OS
Interfaces
Graphics interfaces
Storage
Device features
Device type
Serial ports
Processor speed
Other
Converter type
Features
USB ports
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x USB, SD slot, 1x PS/2, fanless, 1x RCA, 3x RS-232, VGA, windows, linux, tv out
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x ...
Product features

eBox-3300MX-TC

Compatible OS
Interfaces
Graphics interfaces
Storage
Device features
Device type
Serial ports
Processor speed
Other
Converter type
USB ports
Compact Embedded System, MSTI PMX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x USB, SD slot, 1x PS/2, 1x D-Sub, fanless, 3x RS-232, 1x SATA, windows, linux, vga, 2.5" HDD, ap
Compact Embedded System, MSTI PMX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x ...
Product features

eBox-3300MX-AP

Compatible OS
Interfaces
Graphics interfaces
Storage
Device features
Device type
Serial ports
Processor speed
Other
Converter type
Features
USB ports
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3xUSB, SD slot, 1x PS/2, 1x D-Sub, fanless, 3x RS-232, 1x SATA, windows, linux, vga, 2.5" HDD, tv out
Compact Embedded System, MSTI PDX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3xU...
Product features
Compact Embedded System, MSTI PMX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x USB, SD slot, 1x PS/2, 1x D-Sub, fanless, 1x 24-bit GPIO, 3x RS-232, 1x SATA, windows, linux, vga, 2.5" HDD
Compact Embedded System, MSTI PMX-1000 1GHz, 512MB DDR2, 1x Ethernet 10/100, 3x ...
Product features
Fanless Embedded computer, Intel Atom Z5xx, VGA, SSD, CF, SD, 1.8" HDD, PS/2, 4x COM, 4x USB, WiFi, Windows, Linux, 1000base-TX
Fanless Embedded computer, Intel Atom Z5xx, VGA, SSD, CF, SD, 1.8" HDD, PS/2, 4x...
Product features

BIS-6620III

Compatible OS
Processor type
Interfaces
Graphics interfaces
Storage
Wireless communication
Device features
Device type
Network interfaces
Screen size
Other
Serial ports
Switch features
Converter type
USB ports